T8 lighting systems are approximately 25 - 30% more efficient than conventional T12’s. T8 has long been the lighting standard in office buildings and other commercial uses. Energy efficiency and green technologies are driving T8 technology into the sign industry. Energy savings from a conversion can pay back the initial investment in two to three years in most applications.

Each unit is 22" wide and available in 2'(F17) 3'(F25) and 4'(F32) lengths. These modules will stand alone through hardwire connections, daisy chaining or module to transition box connections. The electronic ballast is a cUL listed, high power factor, drawing only .95 amps on a 4 x 32 watt (4 lamp module). The lamps are available in warm white, cool white and daylight.

• cUL listed high power factor electronic ballast
• knockout for hardwire units
• cold weather start
• HPF ballast
• socket tray
• rocker switch
• available in 24, 36 and 48 inch lengths
• available in 17w, 25w and 32w options
• lamps available in warm white, cool white and daylight colours
• suitable for retrofit programs
• T8 lighting systems are approximately 25 - 30% more efficient than conventional T12’s.
• energy savings from a conversion can pay back the initial investment in two to three years in most applications.
• modules will stand alone through hardwire connections, daisy chaining or module to transition box connections

• as a retrofit system for signs and overhead lighting
• as a sub-assembly for new signs
• for indirect lighting applications

• Number of lamps: 4
• Line voltage: 120, 220/240 and 277 volt
• Power factor: high
• Sound Rating: < Class A noise level
• Cold weather start
• High frequency operation: > 20 KHz
• Input frequency: 50/60 Hz
• End of life protection: yes
• EMI filter / RFI noise suppression; complies with FCC 47 CFR part 18
• Thermal protection: yes
• Fixture type: T8 – Straight – average nominal lengths (in inches) 24, 36, 48 inches
• Lamps: 17w, 25w, 32w (available in 835k, 840k and 865k colours)